Stories

I have often said that I just write about what I see. And then I publish my texts and wait to see how readers react to them.

Not many comments do I receive on this blog, but the information stays here and anyone can come back to check it. And at some point someone sees it and continues writing the story.

That is what Joshua Danley, author of The Pelikan's Perch, just did. He now tells the story of Kabutogi Ginjiro's Pelikan nibs from a different perspective while adding a lot of information on the original –Pelikan's— counterparts of the moment.

Only one of those nibs was made by Pelikan.

Two suspiciously similar pens, but only one of them is an Ishi Shoten-Yotsubishi. The other, on the back, is anonymous, but its nib was made by Kabutogi Ginjiro.

And that is great as the whole point of these texts is to learn about fountain pens and about their history.

Thanks, Joshua.

Romillo WiPens Toledo – Pilot (Thai) Black

Bruno Taut
April 16th, 2024
etiquetas: Pelikan, nibmeister Kabutogi Ginjiro, metabitácora

On Ban-ei Nibs (III). Family Portrait

If only for the sake of documenting Ban-ei (挽栄) pens at large, it might be worth to publish a family picture of nibs used on them.

Ban-ei implemented nibs primarily made by nibmeister Kabutogi Ginjiro (兜木銀次郎), but there were some other units of different origin on them. The following picture shows eight examples, but there might me more.

Starting at 1 and clockwise, there are the nibs:

Eight nibs present on Ban-ei pens.

At 1. Sailor nib. On this case, it is associated to a torpedo pen with maki-e decoration.

At 2. Parley nib, JIS no. 3231 registered by Ishikawa Kinpen Seisakusho. The pen is a torpedo with black urushi.

At 4. Steady nib, JIS no. 3233. This is one of the brands registered by Kabutogi. Its pen, an Onoto-type already reviewed, might not be a Ban-es strictly speaking—only Sakai and Kabutogi participated in the production.

At 5. Nib engraved with a Japanese text (復刻手造万年筆, fukkoku tezukuri mannenhitsu, reissue hand-made fountain pen). This text appears on nibs implemented on some Danitrio-commissioned pens, and in some other numbered editions. This nib is likely to be equivalent to those singed as GK (see nib at 7).

At 7. GK-signed nib. Present in a variety of pens, included the Visconti Urushi series.

At 8. Kabutogi's nib labeled as 50. This particular unit is engraved with JIS no. 4622, registered to Kabutogi's brand Seilon.

JIS 4622.

At 10. Kabutogi's nib labeled as 60. This unit is also engraved with JIN no. 4622.

At 11. Platinum nib. Present in many of the Danitrio-commissioned series, but not only on those.

The eight pens.

References:
Eizo FUJII. “酒井栄助の万年筆” (Sakai Eisuke no mannenhitsu; The fountain pens of Sakai Eisuke). Shumi-no Bungubaku, 34, p. 120-124 (2015).
A. LAMBROU & M. SUNAMI. Fountain Pens of Japan. Andreas Lambrou Publishers Ltd., 2012.

Arenton no. 3 – unknown blue-black

Bruno Taut
July 3rd, 2021
etiquetas: Ban-ei, plumín, Sakai Eisuke, nibmeister Kabutogi Ginjiro, Platinum, Sailor, Ishikawa Kinpen Seisakusho, Steady

On Ban-ei Nibs (II). 50, 60 & GK

Ban-ei (挽栄), as we know by now, was a pen brand created by Sakai Eisuke (酒井栄助) with the collaboration of a number of expert craftsmen--Takahashi, Tsuchida, Kitamura, Nakamura, and, of course, Kabutogi Ginjiro (兜木銀次郎), the nibmeister.

However, Ban-ei pens have implemented nibs of diverse origin—-Sailor, Platinum, Ishikawa Kinpen... Today I will only describe the three most common nibs made by Kabutogi Ginjiro himself—those labeled as 50, 60, and GK. There are some others, but are not so common as these three.

Three Ban-ei pens with three characteristic nibs by nibmeister Kabutogi.

These are the dimensions of these nibs, together with those of a size 15 nib by Pilot (Custom 823, 743, 845) for comparison. For data on more nibs, please check the text "Nib Sizes, Feed Diameters".

	.- GK -.	.- 50 -.	.- 60 -.	.- Pilot 15 -.
.Length (mm).	29	29	30	32
.Shoulder width (mm).	7.8	8.4	9.4	8.8
.Feed diameter (mm).	6.5	6.5	6.5	6.4

From left to right, nibs labeled as 60, 50, and GK. The 60 nib is consistently associated to that flatter-looking feed.

The figures clearly show how all those three nibs are very similar in size. Their feeders are, on the other hand, virtually equivalent with a diameter of 6.5 mm. This means that the nibs are interchangeable in their pens.


References:
Eizo FUJII. “酒井栄助の万年筆” (Sakai Eisuke no mannenhitsu; The fountain pens of Sakai Eisuke). Shumi-no Bungubaku, 34, p. 120-124 (2015).
A. LAMBROU & M. SUNAMI. Fountain Pens of Japan. Andreas Lambrou Publishers Ltd., 2012.

Anonymous 6-bu jumbo pen – unknown blue-black ink

Bruno Taut
Nakano, June 29th, 2021
etiquetas: Ban-ei, plumín, nibmeister Kabutogi Ginjiro

From Kamakura to Choshitsu

The fountain pen jargon is not always accurate. At times, words acquire a new meaning to fit an old concept—that was the case of kimono as a pen wrap that I explained on these pages months ago. On other occasions, a new concept requires a new description, but the chosen words are not always adequate.

The case of Kamakura bori is, however, different.

As a maki-e/urushi-e technique, the Kamakura bori is performed by carving the substrate –usually wood— which is then lacquered and polished. Kamakura bori, in actual terms, means “Kamakura carving”, and this technique dates back to the 13th century.

Two pens with carved urushi on a tray carved in the Kamakura style.

The pens are a Ban-ei (top), and possibly an Ishi Shoten (Yotsubishi), although not signed.
Both nibs are by Kabutogi Ginjiro.

On the contrary, on the so-called Kamakura bori pens, the procedure consists first in applying several layers of urushi in different colors that are afterwads carved to expose that stack of colors.

In actual terms, this technique is a form of choshitsu or “engraving of urushi”. However, what we tend to call choshitsu usually display figurative motifs instead of the regular patterns we see on those non-Kamakura-bori pens. These complex choshitsu pens are rare and expensive.

A very traditional choshitsu pen with floral motifs.
Photo by Mr. N. Syrigonakis.

I, for one, think we should rename those non-Kamakura-bori pens as choshitsu pens.


My thanks to Mr. N. Syrigonakis.

Omas 556 – Kobe Ginza Gold Sepia

Bruno Taut
Nakano, September 30th, 2020
etiquetas: Ban-ei, urushi-e, nibmeister Kabutogi Ginjiro, Yotsubishi

Ohashido (I)

Besides the big three Japanese pen companies –Pilot-Namiki, Platinum-Nakaya, and Sailor– there are a bunch of small operations, some of which I have described on these Chronicles: Masahiro, Eboya,... I haven't spoken much about Ôhashidô, and that despite being very active in the local (Japanese) market.

Ôhashidô –Ôhashidô Ltd.– was formally founded in 1965, but it has its origins in Tokyo in 1912, when Yoshiharu Uemura open his workshop in Asakusa while working for SSS, the big company of the time. He moved to Sendai, about 300 km north of Tokyo, after the Big Kanto Earthquake in 1923 to work with inventor Kazuyoshi Hiratsuka. The new shop was located close to the Big Bridge (Ô-hashi) over the river Hirose. Ôhashidô means “the hall of the big bridge”.

The business was completely destroyed during the War. The operation revived around 1950 in the hands of Yoshiharu's son Eiichi Uehara, but not through manufacturing pens but by fixing them. The production of pens was resumed some years later, and by 1965 Ôhashidô Ltd. started formally.

In 2010, Eiichi's son Yûichi Uehara took control of the company. He has become very active in the Japanese scene by attending a big number of sale events hosted by stationers and department stores where he sells his pens directly.

Yuuichi Uehara at work in Maruzen stationery in Nihonbashi (Tokyo).

The traveling rokuro (traditional lathe).

Ôhashidô's operation is quite unique. It seems anchored in the pre-industrial era. There is barely any system in the production: there are no model names, the warranty card is just Uehara's business card, there are no instruction sheets, etc... Contacting him is not easy either—he has no public email address, and only very recently he open a website (https://ohasibo.theshop.jp/).

As for the pens, they are made mostly in ebonite –sometimes from Nikko Ebonite, some other from old stocks of unclear origin--, and implement Sailor nibs of sizes medium and big (following Sailor names) in both 14 K and 21 K grades. In fact, for some time, Ohashido offered big nibs made of 14 K gold, which was not an option on Sailor pens. In a more distant past, Ohashido used nibs by Ishiwaka Kinpen Seisakusho, Kabutogi Ginjiro, and even Ishi Shoten (Yotsubishi). Some sources also speak of nibs made by Eiichi Uehara himself.

A big Ôhashidô nib made of 14 K gold. Of course, made by Sailor.

Pens for sale...

All current Ôhashidô pens use Sailor cartridges and converters. The later, at least, if the barrel was big enough, of course.

And on another Chronicle I will describe some Ôhashidô pen in detail.

Elysee pen, unknown model – Aurora Black

Bruno Taut
Nakano, January 2019
etiquetas: Sailor, Ohashido, Ishikawa Kinpen Seisakusho, Yotsubishi, nibmeister Kabutogi Ginjiro

La Visconti Giapponese

Sometimes reading the pen is truly helpful. Well, mostly always.

At the past Madrid Pen Show I saw the pen on the photograph.

A Visconti. A Visconti?

On it, the signs on the box and on the clip did not really match with the pen itself. The logo of Visconti and the plain inscription on the clip contrasted with the basic structure of the pen—a Japanese eyedropper coated with red urushi. The nib, or rather its engraving, provided the final clue—it was signed by GK, Kabutogi Ginjiro, and the pen is, most likely, a Ban-ei made by Sakai Eisuke (lathe work), Kabutogi Ginjiro (nib), Tsuchida Shuichi (assembly), and Takahashi Kichitaro (urushi coating).

A Ban-ei pen with "nashiji" decoration. Nib signed by Kabutogi Ginjiro.

The additional literature included in the box describes, in Italian, the virtues of the “lacca giapponese” (urushi, of course) and speaks of its long history. It also includes instructions on how to fill and use the pen. Finally, it declares that the pen was part of a limited edition of 100 pens per year, but it does not disclose for how long. This particular unit was made in 1990 as it is numbered as 007/90... out of 100 pens made. (NOTE added on Sept. 2020: Some reports --see comments-- speak of serial numbers over 100 despite what the pen docs claim. So we should add some pinches of salt to those words despite coming from Visconti).

So, what was Visconti doing at that time? How come this very Japanese pen showed up under an Italian brand?

Visconti started its operation in 1988 and immediately contacted the Japanese lathe master Kato Kiyoshi, with whom Visconti would later collaborate in the fabrication of some models, including some versions of the Ragtime. And it is also at this time that Visconti contacted Sakai Eisuke and his team.

Apparently, there was at least two series of pens made by the Ban-ei group for the Italian brand. The first one, to which the pen shown today belongs, had a golden ring on the cap. As was mentioned before, Visconti released 100 units per year and there are records of at least two batches: 1990 and 1991. About the colors, some sources say that there were pens in ro-iro (black) urushi, but I am only aware of pens made in shu-urushi (red) as the one here shown. The clip inscriptions are either "VISCONTI" or "URUSHI".

The GK-signed nib of the Visconti Ban-ei. Note also the inscription on the clip: "VISCONTI".

A second series of Ban-ei pens were produced at a later date—1993 or 1995. On this occasion, the pens carried no rings and came in three colors: black (100 units), red (100 units), and green (50 units). The units I have seen have their clips engraved with the word "URUSHI", but there might be other other texts on them.

Some people speak of a third batch of pens previous to the first series here described. They could have been prototypes and test products later marketed by Visconti.

These are the dimensions of the pen I found at the Madrid Pen Show (2017) that belongs to the first series, and was made in 1990:

Length closed: 145 mm
Length open: 126.5 mm
Length posted: 176 mm
Diameter: 16.5 mm
Weight (dry): 25.3 g
Ink deposit: 3.3 ml

The cap ring carries the unit number of the series over the production year. This particular unit is the 007.90: number 7 (out of 100) made in 1990.

It is interesting to note that these Japanese Viscontis seem to predate those Danitrio-commissioned (::1::, ::2::) that are much better known. However, these Visconti pens remained essentially anonymous, as was customary on Ban-ei pens, and the Italian brand did not even declare where they had been made.

A Danitrio-commissioned Ban-ei.

Of course!—we all know by now that GK was a magnificent Italian nibmeister… But reading the pen helps to know what you had on your hands beyond what labels and inscriptions might say.

Platinum 70th anniversary, green celluloid – Sailor Yama-dori

Bruno Taut
Nakano, January 17th 2018
labels: Ban-ei, Visconti, Danitrio, Italia, Japón, nibmeister Kabutogi Ginjiro, urushi

On Ban-ei Nibs

On this text, some more notes on Ban-ei (挽栄) pens, including some corrections to my own words.

These pens made by Sakai Eisuke (酒井栄助) and coworkers (Kabutogi, Takahashi, Tsuchida, Kitamura, Nakamura) are difficult to follow. They are, for the most part, unmarked with any brand name, and as a result they are invisible to many aficionados.

Ebonite bodies, often lacquered, occasional maki-e and urushi-e motifs, mostly gold nibs, Japanese eyedropper filling system (albeit with exceptions), teardrop clips… All these are some usual features of Ban-ei pens, but in no case are they exclusive to them.

The only element in Ban-ei pens that carried some sort of marking were the nibs, although not always. Many of these pens implemented nibs made by Kabutogi Ginjiro (兜木銀次郎), and these were more often than not labeled in one way or another—either through some JIS number (3233, 4622, 4922), some of the brands owned by this nibmeister or, more often, through the initials GK.

An Onoto-type pen made by Sakai Eisuke and Kabutogi Ginjiro.

On this case, the nib is labeled with the brand name "Steady", one of the brands registered by the nibmeister Kabutogi Ginjiro. Its JIS number was 3233, but it is not engraved on this particular nib.

A balance model with the wrongly named "Kamakura bori" decoration.

The nib is marked with the JIS no. 4622, associated to the factory Kabutogi Seisakusho Tabata and to the brand name Seilon.

However, Ban-ei pens also implemented a number of other nibs, and many were simply not signed at all. In particular, Ban-ei used Platinum and Sailor nibs. On both cases, the engraving was the same: “WARRANTED / 585 / 14 KARAT / PEN / IRIDIOSUMIN”, but their geometries are different, as can be seen on the picture.

Two Ban-ei pens with very different nibs--Sailor on the left, Platinum on the right. The later belongs to the Danitrio-commissioned series.

Close up of the nibs. Sailor on the left, Platinum on the right. The engraved text is the same --“WARRANTED / 585 / 14 KARAT / PEN / IRIDIOSUMIN”--, but not so is the size of the fonts. The Platinum nib is flatter than the Sailor.

In the mid 1990s, as we have already seen on these Chronicles, the company Danitrio commissioned some pens to the old troupe of artisans. On this occasion, the pens were properly labeled as “Ban-ei - 挽栄” on the cap lip, thus eliminating the anonymity of the previous works. Regarding the nibs of these pens, there is some conflicting information. For the most part, the nibs of the Danitrio Ban-ei pens are Platinum, but there is also a small batch of nibs carrying a special engraving: 復刻手造万年筆 (fukkoku tezukuri mannenhitsu), reissue hand-made fountain pen. The geometry of these nibs differs greatly from those made by Platinum. It is, in fact, very close to the geometry of the nibs signed with the initials GK.

Danitrio founder Bernard Lyn suggests on this book Maki-e, an Art for the Soul (Dani International Corporation, 2003) that it was Kabutogi’s son, by the name of Toshiya, the new nibmeister of the Ban-ei team after his father (Gingiro) had passed away. And I reproduced this idea on these same pages. However, further investigations in Tokyo pointed out that Kabutogi Toshiya was not a nibmeister and could not be the artisan behind those nibs. Sure enough, he had good contacts in Tokyo and probably access to old spare parts. The consequence of all this, then, is that we might need to add a pinch of salt to the claim that those nibs had been made by Kabutogi’s son.

Four Ban-ei pens. Clockwise from the red urushi pen: Danitrio Ban-ei with the special engraving (復刻手造万年筆) nib, balance model with "nashiji" decoration and GK nib, Danitrio Ban-ei with "nashiji" decoration and Platinum nib, and balance model with maki-e decoration (rabbit and moon motif) and Sailor nib.

Close up of the previous pens. Note the similar geometry of the two nibs on the back--the one with the special engraving and the GK nib. Both are very cylindrical and have heart-shaped breathing holes.

In fact, Mr. Eizo Fujii never mentions the figure of Kabutogi Toshiya on his article “The fountain pens of Sakai Eisuke” (Shumi-no Bungubaku, 34, p. 120-124). On it, Mr Fujii mentions Kabutogi Ginjiro and Platinum as the sources for the nibs of the Danitrio Ban-ei pens.

Lambrou and Sunami, on their side, speak of early Ban-ei pens equipped with nibs manufactured by Ishikawa Kinpen Seisakusho (JIS no. 3231), from Tokyo. This company provided nibs to a number of makers, including Ferme.

A Ban-ei with a Henckel nib made of steel.

A Henckel nib (JIS no. 3417). There are no records of any collaboration between Henckel and Sakai Eisuke, but there are a number of Ban-ei pens out there with this same nib.

Finally, there are some Ban-ei pens sporting exotic nibs. Certainly, many of them are the result of absurd combinations often driven by necessity. But some others are not so easy to diagnose. A case in point is a group of Ban-ei pens implementing steel nibs manufactured by Henckel (JIS no. 3417). There are no records, apparently, of such collaboration, but it is also unusual to see a number of pens with the very same nib. Some aficionados have suggested that these Henckel nibs were attached to remaining Ban-en bodies that were never put to sale.

The obvious conclusion is the variety of sources to the nibs implemented by Sakai Eisuke and collaborators. Those made by nibmeister Kabutogi Ginjiro are indeed relevant and even common, but by no means are those GK nibs the only ones; not to mention that this nibmeister was very prolific and worked for a number of brands.

In any event, what matters here is that Ban-ei pens are still a mystery. But that might be the fate a small and artisanal operation with few written records. And some people indeed feel the strong appeal of these almost anonymous pens.


References:
Bernard LYN. Maki-e, an Art for the Soul. Dani International Corporation, 2003.
Eizo FUJII. “酒井栄助の万年筆” (Sakai Eisuke no mannenhitsu; The fountain pens of Sakai Eisuke). Shumi-no Bungubaku, 34, p. 120-124 (2015).
A. LAMBROU & M. SUNAMI. Fountain Pens of Japan. Andreas Lambrou Publishers Ltd., 2012.

Sheaffer 1250 – Pilot Iroshizuku Ku-jaku

Bruno Taut
Nakano, June 14th, 2017
etiquetas: Ban-ei, Platinum, Sailor, plumín, Sakai Eisuke, nibmeister Kabutogi Ginjiro, Danitrio, Ishikawa Kinpen Seisakusho, Ferme, Henckel

Onoto Type by Sakai Eisuke

Ban-ei pens have shown up several times on these Chronicles and the basic data are is well known. But the devil is in the details: Sakai Eisuke and his team did not leave much information behind and any pen can be a source for more knowledge.

The following pen seems to have been made in the 1960s. It is an “Onoto-type” pen, so popular in Japan even nowadays. On the information sheet accompanying we can read that this is a pen inspired on the Onoto model of 1918, with a plunger filling system. Needless to say, the Japanese pen does not use any self-filling operation but the very dear Japanese eyedropper system (::1::, ::2::) derived from the old Onoto plunger.

On this picture, both threads of the ink deposit and of thr shut-off valve are half unscrewed.

This pen is designed to be posted, although the final length is quite long--180 mm.

Classical design of the section of an "Onoto-type" Japanese pen.

The information sheet also states that the pen is the work of just two people—Kabutogi Ginjiro, nib, and Sakai Eisuke, body. And the two other regular actors of the Ban-ei group, Tsuchida and Takahashi, are absent, which points out at the idea of this being a precursor of what later would become the Ban-ei/Tsuchida brand of pens. But, to what are we calling Ban-ei or Tsuchida pens?

The information sheet signed by Kabutogi Ginjiro (兜木銀次郎) and Sakai Eisuke (酒井栄助).

The nib, made of 14 K gold, is engraved with the name of one of the Kabutogi’s registered brands—Steady: “K14 / Steady / Special / Perfect / -<3>- / Pen”.

The Steady nib made by Kabutogi Ginjiro (JIS no. 3233, although there is no JIS mark on this nib).

These are the dimensions of this Onoto-style pen:

Length closed: 147 mm
Length open: 142 mm
Length posted: 180 mm
Diameter: 11.0 mm
Weight: 11.8 g (dry)
Ink deposit: 2.8 ml

This particular pen was commissioned by Seibu Department Stores in Tokyo.

The weak point in the Japanese eyedropper pens--the point where the rod operating the shut-off valve enters the ink deposit.

The weak point of this pen is the back seal between the valve rod and the ink deposit. This is the main source of problems in Japanese eyedropper pens.

Sailor Profit, Naginata Togi – Tomikei Blue.

Bruno Taut
Nakano, March 21st, 2017
etiquetas: Ban-ei, Kabutogi Ginjiro, Steady, Onoto, Sakai Eisuke