Showing posts with label Ban-ei. Show all posts
Showing posts with label Ban-ei. Show all posts

11 December 2022

From Sakai to Pilot

In the 1980s Pilot renovated the fountain pen lineup. It all started with the Pilot 65 in 1983—the first modern balance Pilot, save the Art Silvern pens of the 1960s.

Pilot 65, and its insides.

Those new balance pens were modeled after some pre-war models, thus predating some alleged master pieces. In fact, Pilot commissioned lathe master Sakai Eisuke (酒井栄助), of Ban-ei fame, to create some prototypes.

Such is the case of the following unit—a balance Pilot made of ebonite, coated with urushi. Its filling system is a Japanese eyedropper. It was made in 1983 according to the date on the nib.

A Pilot pen by Sakai Eisuke.

The engraving on the body follows the pattern seen on pen in the 1938-1944 time window:

“PILOT” / THE PILOT PEN (P logo) MFG. CO. LTD / MADE IN JAPAN.

Its dimensions are slightly bigger than the later-produced Custom models with size 5 and 10 nibs. One such example of them is the following pen with the maki-e decoration in the form of East Asian phoenix (Hôô, 鳳凰), signed collectively by the Kokkokai, the Pilot guild of maki-e artisans. Its nib is dated October of 1988, and the filling system is a pulsated piston, an early version of what later would become the converter CON-70 (some additional information on my chronicle "Carving").

Pilot Hôô. A maki-e decorated size 10 pen.

.Sakai´s pen.

.Pilot´s Hôô.
Length closed (mm) 146 142
Length open (mm) 124 127
Length posted (mm) 176 165
Max diameter (mm) 15.0 14.0
Weight, dry (g) 18.6 20.3
Ink deposit (ml) 2.5 1.4

This model set the structure of contemporary maki-e decorated pen we still see today—balance models with nibs 5 and 10 (Pilot numbering).

But at the same time, in those late 1980s, Pilot made a number of urushi-e decorated pens. Masa Sunami, on his book Fountain Pens of Japan (2012), speaks about them as “museum pieces”. These were very limited runs –between 5 and 20 units— of pens decorated with Tsugaru-nuri decoration in sizes 10 and 50. They are indeed rarities worth of some special attention, and of a Chronicle.

Museum pieces. Picture courtesy of Ottomarkiv.


My thanks to Ottomarkiv and to Masa Sunami.


Moonman A1 – Montblanc Burgundy Red

Bruno Taut
December 8th, 2022
labels: Pilot, Ban-ei, maki-e, Sakai Eisuke

03 July 2021

On Ban-ei Nibs (III). Family Portrait

If only for the sake of documenting Ban-ei (挽栄) pens at large, it might be worth to publish a family picture of nibs used on them.

Ban-ei implemented nibs primarily made by nibmeister Kabutogi Ginjiro (兜木銀次郎), but there were some other units of different origin on them. The following picture shows eight examples, but there might me more.

Starting at 1 and clockwise, there are the nibs:

Eight nibs present on Ban-ei pens.

At 1. Sailor nib. On this case, it is associated to a torpedo pen with maki-e decoration.


At 2. Parley nib, JIS no. 3231 registered by Ishikawa Kinpen Seisakusho. The pen is a torpedo with black urushi.


At 4. Steady nib, JIS no. 3233. This is one of the brands registered by Kabutogi. Its pen, an Onoto-type already reviewed, might not be a Ban-es strictly speaking—only Sakai and Kabutogi participated in the production.


At 5. Nib engraved with a Japanese text (復刻手造万年筆, fukkoku tezukuri mannenhitsu, reissue hand-made fountain pen). This text appears on nibs implemented on some Danitrio-commissioned pens, and in some other numbered editions. This nib is likely to be equivalent to those singed as GK (see nib at 7).


At 7. GK-signed nib. Present in a variety of pens, included the Visconti Urushi series.


At 8. Kabutogi's nib labeled as 50. This particular unit is engraved with JIS no. 4622, registered to Kabutogi's brand Seilon.

JIS 4622.

At 10. Kabutogi's nib labeled as 60. This unit is also engraved with JIN no. 4622.


At 11. Platinum nib. Present in many of the Danitrio-commissioned series, but not only on those.



The eight pens.


References:
Eizo FUJII. “酒井栄助の万年筆” (Sakai Eisuke no mannenhitsu; The fountain pens of Sakai Eisuke). Shumi-no Bungubaku, 34, p. 120-124 (2015).
A. LAMBROU & M. SUNAMI. Fountain Pens of Japan. Andreas Lambrou Publishers Ltd., 2012.


Arenton no. 3 – unknown blue-black

Bruno Taut
July 3rd, 2021
etiquetas: Ban-ei, plumín, Sakai Eisuke, nibmeister Kabutogi Ginjiro, Platinum, Sailor, Ishikawa Kinpen Seisakusho, Steady

29 June 2021

On Ban-ei Nibs (II). 50, 60 & GK

Ban-ei (挽栄), as we know by now, was a pen brand created by Sakai Eisuke (酒井栄助) with the collaboration of a number of expert craftsmen--Takahashi, Tsuchida, Kitamura, Nakamura, and, of course, Kabutogi Ginjiro (兜木銀次郎), the nibmeister.

However, Ban-ei pens have implemented nibs of diverse origin—-Sailor, Platinum, Ishikawa Kinpen... Today I will only describe the three most common nibs made by Kabutogi Ginjiro himself—those labeled as 50, 60, and GK. There are some others, but are not so common as these three.

Three Ban-ei pens with three characteristic nibs by nibmeister Kabutogi.

These are the dimensions of these nibs, together with those of a size 15 nib by Pilot (Custom 823, 743, 845) for comparison. For data on more nibs, please check the text "Nib Sizes, Feed Diameters".

.- GK -. .- 50 -. .- 60 -. .- Pilot 15 -.
.Length (mm). 29 29 30 32
.Shoulder width (mm). 7.8 8.4 9.4 8.8
.Feed diameter (mm). 6.5 6.5 6.5 6.4

From left to right, nibs labeled as 60, 50, and GK. The 60 nib is consistently associated to that flatter-looking feed.

The figures clearly show how all those three nibs are very similar in size. Their feeders are, on the other hand, virtually equivalent with a diameter of 6.5 mm. This means that the nibs are interchangeable in their pens.


References:
Eizo FUJII. “酒井栄助の万年筆” (Sakai Eisuke no mannenhitsu; The fountain pens of Sakai Eisuke). Shumi-no Bungubaku, 34, p. 120-124 (2015).
A. LAMBROU & M. SUNAMI. Fountain Pens of Japan. Andreas Lambrou Publishers Ltd., 2012.


Anonymous 6-bu jumbo pen – unknown blue-black ink

Bruno Taut
Nakano, June 29th, 2021
etiquetas: Ban-ei, plumín, nibmeister Kabutogi Ginjiro

30 September 2020

From Kamakura to Choshitsu

The fountain pen jargon is not always accurate. At times, words acquire a new meaning to fit an old concept—that was the case of kimono as a pen wrap that I explained on these pages months ago. On other occasions, a new concept requires a new description, but the chosen words are not always adequate.

The case of Kamakura bori is, however, different.

As a maki-e/urushi-e technique, the Kamakura bori is performed by carving the substrate –usually wood— which is then lacquered and polished. Kamakura bori, in actual terms, means “Kamakura carving”, and this technique dates back to the 13th century.


Two pens with carved urushi on a tray carved in the Kamakura style.


The pens are a Ban-ei (top), and possibly an Ishi Shoten (Yotsubishi), although not signed.
Both nibs are by Kabutogi Ginjiro.

On the contrary, on the so-called Kamakura bori pens, the procedure consists first in applying several layers of urushi in different colors that are afterwads carved to expose that stack of colors.

In actual terms, this technique is a form of choshitsu or “engraving of urushi”. However, what we tend to call choshitsu usually display figurative motifs instead of the regular patterns we see on those non-Kamakura-bori pens. These complex choshitsu pens are rare and expensive.


A very traditional choshitsu pen with floral motifs.
Photo by Mr. N. Syrigonakis.

I, for one, think we should rename those non-Kamakura-bori pens as choshitsu pens.


My thanks to Mr. N. Syrigonakis.


Omas 556 – Kobe Ginza Gold Sepia

Bruno Taut
Nakano, September 30th, 2020
etiquetas: Ban-ei, urushi-e, nibmeister Kabutogi Ginjiro, Yotsubishi

13 September 2019

Japanese Eyedropper Today (I)

The so-called Japanese eyedropper system –inki-dome shiki (インキ止め式) in Japanese— was in fact invented by Onoto in the beginning of the 20th century. Those Onoto reached Japan imported by Maruzen and the system –an eyedropper with a shut-off valve— clicked among the locals. The final result was that this system was copied and reproduced by most Japanese pen makers along its history up to today.


An Onoto with the shut-off valve system. Not yet a Japanese eyedropper, I guess.


A Japanese Swan (Nobuo Ito's Swan) with the Japanese eyedropper system.

The inki-dome, however, fell out of favor by the late 1950s when Platinum introduced the ink cartridge and most other makers followed the example. Only minor makers –I am thinking of Sakai Eisuke's operations— kept the system alive till the 1980s.


A Sakai Eisuke's pen made in collaboration with Kabutogi Ginjiro (::1::). Possibly from the 1960s.

In 1985, Pilot commissioned lathe master Sakai the creation of a prototype based on the style of the Pilot pens from the early 1930s, The result was what later became the Pilot (and Namiki) size 50 Urushi, and it implements the Japanese eyedropper system.


The Pilot Urushi in size 50--a modern Japanese eyedropper. This pen is incorrectly named by many as Namiki Emperor, but the Emperor model is decorated with maki-e techniques according to the Namiki catalog.

But who else followed? Not much.

Eboya used the system for some years (::2::, ::3::), but its production relied in the know-how of lathe master Kanesaki Noritoshi. Eboya's boss, Mr. Endo, has announced the new production of Eboya pens with this system, but there are no final dates for their release.


An old Eboya (2013) from the Kanesaki time. It implements the Japanese eyedropper system. At that time, the brand name was still Nebotek.

More recently, as of 2018, the sort-lived Iwase Seisakusho also marketed some pens with the Japanese eyedropper system. These were either old incomplete pen bodies by Ishi Shoten (owner of the brand Yotsubishi) or new pen bodies made by lathe master Momose. But Iwase Seisakusho had a very brief life and very few units of it made to the market.


An Iwase Seisakusho based on a body by Momose Yasuaki.

From California, Danitrio makes some models with Japanese eyedropper. These are usually expensive models with urushi or maki-e decoration.


Some Danitrio pens as exposed at Itoya Ginza (Tokyo) in 2010. Photo courtesy of Moskva.

Finally, a surprising actor is the Taiwanese brand Opus 88 (Jin Gi Industrial Co.). But these Japanese eyedroppers deserve a Chronicle on their own.


The Opus 88 Koloro. A surprising new actor in the Japanese eyedropper business.



Opus 88 Koloro – De Atramentis Beethoven

Bruno Taut
Nakano, September 12th 2019
etiquetas: soluciones técnicas, Pilot, Eboya, Danitrio, Iwase Seisakusho, Opus 88, mercado, Onoto, Japón, mercado, Kanesaki, Sakai Eisuke, Momose Yasuaki

16 October 2018

Anonymous Music

My latest acquisition is an anonymous pen with a very non-anonymous nib. And this combination make the whole pen all the more intriguing, and, for some, appealing.

The pen, in essence, is a Japanese eyedropper, made of ebonite with a very discreet maki-e decoration –a "tanzaku" (poem cards) pattern. The clip is of the teardrop shape, just like many Ban-ei pens.


An anonymous pen. Other than the inscriptions on the nib, the only text on it says R14K, and is on the cap ring. The very discreet maki-e --a "tanzaku" pattern-- is not signed.

And this clip, together with the overall shape of the pen and the shape of the section, and even the geometry of the ebonite feed point out at Ban-ei (Sakai Eisuke) as the master mind behind it. However, this idea is nothing but a guess, although this pen is very likely to have been made in the 1960s at Asakusa area in Tokyo.


A Ban-ei pen (top) and the anonymous pen with an interesting nib. Note the similarities in the shape. The Ban-ei pen is larger in all dimensions.


Feeds and sections of the pens on the previous picture: Ban-ei on top, anonymous on bottom. This geometry of the feed was very common in Japan from the 1960s till well into the 1990s on smaller pen makers.

The comes the nib—a beautiful music nib perfectly identifiable as made by nibmeister Kubo Kohei. In fact, the nib inscription NK stands for Nobel Kubo, where Nobel is one of the brands Mr. Kubo created during his career as nib maker. The nib is likely to be a replaced unit, but it could also show the origin of the pen itself. Then, is this a Nobel pen? Many a Nobel pen were anonymous –no brand name was imprinted on the pen--, but ebonite was not a typical material on that brand as Mr. Kubo doesn’t work with the lathe.


The music nib by Kubo Kohei. It is made of steel and is gold plated. The inscriptions read " STANDARD / NK / (JIS mark) / IRIDIUM / < 3 > / NPK ".

All in all, not much we know for certain about this pen, but the nib, and the unpretentious decoration make it most interesting.

These are the dimensions of the pen:

Length closed: 138 mm
Length open: 119 mm
Length posted: 166 mm
Diameter: 13.7 mm
Weight: 16.7 g (dry)
Ink deposit: 2.3 ml

And the search for information continues…


Twsbi Eco with Kubo music nib – Aurora Black

Bruno Taut
Nakano, October 16th 2018
etiquetas: nibmeister Kubo Kohei, maki-e, Ban-ei, Nobel, marca desconocida, plumín, plumín musical

07 May 2018

Kubo Meets Sakai

The figure of Kubo Kohei (久保幸平) is already known to the readers. He is a very prestigious nibmeister with a long history of nibs made for his own brands –Elliott, Nobel–, and for others –Push, Danitrio, even Zôhiko. The purpose of this Chronicle is to show some more remarkable creations of this master.


An unusual music nib by Kubo Kohei.

Kubo Kohei has made music nibs in the past, as I have reported here. However, that example was a very traditional music nib: two slits, three tines. The following examples go one step forward: three slits, four tines. The result is a very broad and wet line showing a good –but not extreme— variation on the writing.


Writing sample of a 4-tine music nib by nibmeister Kubo.

These three music nibs are associated to three outstanding pens—three old pens made by Sakai Eisuke (酒井栄助). They had not reached the market and had been retrofitted with Henckel nibs, which is not rare in what looks like production leftovers by the Ban-ei group.


All three nibs carry the same inscription: "ELEGANT / KB / 18 K - 750 / MADE IN / JAPAN".


However, the ways their tips are cut are different--the one on top is very sharp, and that on bottom is the roundest of them.

These pens are all Japanese eyedroppers of very generous dimensions. So big, in fact, that the Kubo’s nibs seem a tad too small. These are the dimensions of the pens:

-.Wooden.-

-.Plain,
- black ebonite.-
-.Bamboo-like,
- black ebonite.-
Length closed (mm) 145 173 152
Length open (mm) 130 150 132
Length posted (mm) 180 208 186
Diameter (mm) 20 18 20
Weight, dry (g) 36.3 44.0 44.9


The three pens where Kubo met Sakai--years after the disappearance of the later.
Only the pen in the middle (black ebonite in the shape of bamboo) has an additional engraving--on the clip it says "NEW CLIP", showing some parts coming from Fukunaka Seisakusho. The plain black pen (on top) has no clip.

Remarkable pens with remarkable nibs, although they might not be the best match. But sure they are attractive and desirable.

My thanks to Ms. Lai.


Platinum pocket, steel and stripes – De Atramentis Jeans Blue

Bruno Taut
Nakano, May 6th 2018
etiquetas: nibmeister Kubo Kohei, Ban-ei, plumín, plumín musical

22 January 2018

La Visconti Giapponese

Sometimes reading the pen is truly helpful. Well, mostly always.

At the past Madrid Pen Show I saw the pen on the photograph.


A Visconti. A Visconti?

On it, the signs on the box and on the clip did not really match with the pen itself. The logo of Visconti and the plain inscription on the clip contrasted with the basic structure of the pen—a Japanese eyedropper coated with red urushi. The nib, or rather its engraving, provided the final clue—it was signed by GK, Kabutogi Ginjiro, and the pen is, most likely, a Ban-ei made by Sakai Eisuke (lathe work), Kabutogi Ginjiro (nib), Tsuchida Shuichi (assembly), and Takahashi Kichitaro (urushi coating).


A Ban-ei pen with "nashiji" decoration. Nib signed by Kabutogi Ginjiro.

The additional literature included in the box describes, in Italian, the virtues of the “lacca giapponese” (urushi, of course) and speaks of its long history. It also includes instructions on how to fill and use the pen. Finally, it declares that the pen was part of a limited edition of 100 pens per year, but it does not disclose for how long. This particular unit was made in 1990 as it is numbered as 007/90... out of 100 pens made. (NOTE added on Sept. 2020: Some reports --see comments-- speak of serial numbers over 100 despite what the pen docs claim. So we should add some pinches of salt to those words despite coming from Visconti).


So, what was Visconti doing at that time? How come this very Japanese pen showed up under an Italian brand?

Visconti started its operation in 1988 and immediately contacted the Japanese lathe master Kato Kiyoshi, with whom Visconti would later collaborate in the fabrication of some models, including some versions of the Ragtime. And it is also at this time that Visconti contacted Sakai Eisuke and his team.

Apparently, there was at least two series of pens made by the Ban-ei group for the Italian brand. The first one, to which the pen shown today belongs, had a golden ring on the cap. As was mentioned before, Visconti released 100 units per year and there are records of at least two batches: 1990 and 1991. About the colors, some sources say that there were pens in ro-iro (black) urushi, but I am only aware of pens made in shu-urushi (red) as the one here shown. The clip inscriptions are either "VISCONTI" or "URUSHI".


The GK-signed nib of the Visconti Ban-ei. Note also the inscription on the clip: "VISCONTI".

A second series of Ban-ei pens were produced at a later date—1993 or 1995. On this occasion, the pens carried no rings and came in three colors: black (100 units), red (100 units), and green (50 units). The units I have seen have their clips engraved with the word "URUSHI", but there might be other other texts on them.

Some people speak of a third batch of pens previous to the first series here described. They could have been prototypes and test products later marketed by Visconti.

These are the dimensions of the pen I found at the Madrid Pen Show (2017) that belongs to the first series, and was made in 1990:

Length closed: 145 mm
Length open: 126.5 mm
Length posted: 176 mm
Diameter: 16.5 mm
Weight (dry): 25.3 g
Ink deposit: 3.3 ml


The cap ring carries the unit number of the series over the production year. This particular unit is the 007.90: number 7 (out of 100) made in 1990.

It is interesting to note that these Japanese Viscontis seem to predate those Danitrio-commissioned (::1::, ::2::) that are much better known. However, these Visconti pens remained essentially anonymous, as was customary on Ban-ei pens, and the Italian brand did not even declare where they had been made.


Of course!—we all know by now that GK was a magnificent Italian nibmeister… But reading the pen helps to know what you had on your hands beyond what labels and inscriptions might say.


Platinum 70th anniversary, green celluloid – Sailor Yama-dori

Bruno Taut
Nakano, January 17th 2018
labels: Ban-ei, Visconti, Danitrio, Italia, Japón, nibmeister Kabutogi Ginjiro, urushi