Belage Music

Yet another music nib…

A number of three-tined music nibs have appeared on these pages. With the exceptions of a magnificent Waterman’s size 4 and of a bespoke Montblanc modern nib, all were made in Japan after the War. Those music nibs are, in general, quite unassuming and they are associated to usual workhorses and not to luxurious models with lavish decoration or exotic materials. So, regular pens for regular use receive –and received— some of the most exciting nibs (and I am not only meaning mucis nibs).

A collection of music nibs made in Japan.

The Belage was a model Platinum launched in 1979. It was a cartridge converter pen with a wing-flow nib made of steel and of gold. Its design was very clean—basically a continuous steel cylinder from cap to barrel with a narrow plastic tail where the cap could be attached for posting. This design received the “Good Design Award” of the Ministry of International Trade and Industry of Japan.

Three different Platinum Belage. Older on top. Note the plastic tail on the two older units.

However, later versions of the pen had this clean design changed. Now, the barrel is slightly tapered and the cap posts directly on it, with no need of the narrower tail present on the original model.

The newer Belage.

This newer version was also smaller than the original—shorter, thinner, lighter. And its nib is also smaller in dimensions. It is still a wing-flow nib—only smaller. But the point today is that there were three-tined music nibs on these Belage pens. On this case, it is made of 14 K gold.

Front...

... back...

... and inside. Note the two ink channels in the feed.

These are the dimensions of this pen:

Length closed: 130.5 mm
Length open: 120.5 mm
Length posted: 143.0 mm
Diameter: 11.0 mm
Weight: 19.0 g (dry, with converter)

It is possible that the original Belage might have had a music nib. After all, we have already seen a wing-flow nib of that same size with three tines on a pocket pen from the mid 1970s.

A Platinum pocket pen with a wing-flow nib from 1973.

This particular Belage with music nib was manufactured in 1998.

The Belage from 1998.

Platinum pocket pen, Yamada Seisakusho – KWZ Brown #2

Bruno Taut
Nakano, January 26th 2018
etiquetas: plumín, plumín musical, Platinum

La Visconti Giapponese

Sometimes reading the pen is truly helpful. Well, mostly always.

At the past Madrid Pen Show I saw the pen on the photograph.

A Visconti. A Visconti?

On it, the signs on the box and on the clip did not really match with the pen itself. The logo of Visconti and the plain inscription on the clip contrasted with the basic structure of the pen—a Japanese eyedropper coated with red urushi. The nib, or rather its engraving, provided the final clue—it was signed by GK, Kabutogi Ginjiro, and the pen is, most likely, a Ban-ei made by Sakai Eisuke (lathe work), Kabutogi Ginjiro (nib), Tsuchida Shuichi (assembly), and Takahashi Kichitaro (urushi coating).

A Ban-ei pen with "nashiji" decoration. Nib signed by Kabutogi Ginjiro.

The additional literature included in the box describes, in Italian, the virtues of the “lacca giapponese” (urushi, of course) and speaks of its long history. It also includes instructions on how to fill and use the pen. Finally, it declares that the pen was part of a limited edition of 100 pens per year, but it does not disclose for how long. This particular unit was made in 1990 as it is numbered as 007/90... out of 100 pens made. (NOTE added on Sept. 2020: Some reports --see comments-- speak of serial numbers over 100 despite what the pen docs claim. So we should add some pinches of salt to those words despite coming from Visconti).

So, what was Visconti doing at that time? How come this very Japanese pen showed up under an Italian brand?

Visconti started its operation in 1988 and immediately contacted the Japanese lathe master Kato Kiyoshi, with whom Visconti would later collaborate in the fabrication of some models, including some versions of the Ragtime. And it is also at this time that Visconti contacted Sakai Eisuke and his team.

Apparently, there was at least two series of pens made by the Ban-ei group for the Italian brand. The first one, to which the pen shown today belongs, had a golden ring on the cap. As was mentioned before, Visconti released 100 units per year and there are records of at least two batches: 1990 and 1991. About the colors, some sources say that there were pens in ro-iro (black) urushi, but I am only aware of pens made in shu-urushi (red) as the one here shown. The clip inscriptions are either "VISCONTI" or "URUSHI".

The GK-signed nib of the Visconti Ban-ei. Note also the inscription on the clip: "VISCONTI".

A second series of Ban-ei pens were produced at a later date—1993 or 1995. On this occasion, the pens carried no rings and came in three colors: black (100 units), red (100 units), and green (50 units). The units I have seen have their clips engraved with the word "URUSHI", but there might be other other texts on them.

Some people speak of a third batch of pens previous to the first series here described. They could have been prototypes and test products later marketed by Visconti.

These are the dimensions of the pen I found at the Madrid Pen Show (2017) that belongs to the first series, and was made in 1990:

Length closed: 145 mm
Length open: 126.5 mm
Length posted: 176 mm
Diameter: 16.5 mm
Weight (dry): 25.3 g
Ink deposit: 3.3 ml

The cap ring carries the unit number of the series over the production year. This particular unit is the 007.90: number 7 (out of 100) made in 1990.

It is interesting to note that these Japanese Viscontis seem to predate those Danitrio-commissioned (::1::, ::2::) that are much better known. However, these Visconti pens remained essentially anonymous, as was customary on Ban-ei pens, and the Italian brand did not even declare where they had been made.

A Danitrio-commissioned Ban-ei.

Of course!—we all know by now that GK was a magnificent Italian nibmeister… But reading the pen helps to know what you had on your hands beyond what labels and inscriptions might say.

Platinum 70th anniversary, green celluloid – Sailor Yama-dori

Bruno Taut
Nakano, January 17th 2018
labels: Ban-ei, Visconti, Danitrio, Italia, Japón, nibmeister Kabutogi Ginjiro, urushi

Ôsôji

Japanese people end the year with a traditional clean up of the house--and of the office at times. This is called ôsôji: big clean up. On the way, many forgotten or out of use goods end up in the garbage. But your junk might be someone else’s treasure.

The Wagner “end-of-the-year” bazaar is a mixture of an end of the year party and a small market where to sell all those pens –and accessories you might no longer want. Or at least that was at some time. Nowadays, it has become a small pen show for local traders perfectly comparable in size with the “Pen Trading” (such is the name) event celebrated in Tokyo in Spring, usually by the end of April or beginning of May (::1::, ::2::).

So, this past December 30th, pen aficionados in Tokyo gathered at the end-of-the-year bazaar organized by the Wagner group. Between 150 and 200 visitors, and about 15 traders conformed this event where the commercial activity dominated over any other aspect. Fair enough… save for the exhaustion of the formula: too few traders with small variety and selection of pens for a very active pen community. The paradox is that other events in Tokyo organized by Maruzen (World of Fountain Pens) and by Mitsukoshi (Fountain Pens of the World Festival; ::1::, ::2::, ::3::), both focused on new pens—attract a lot more people and generate a higher economic activity.

Japan seems faithful to its tradition of isolation. The Galápagos syndrome is alive and well in a number of areas in this island nation. It is not easy to pinpoint a single reason to explain such attitude, but Economics might provide some arguments—are there real incentives to open the market to Barbaric influences?

Now, how long can this isolation last?

Romillo Nervión – Sailor Blue Iron

Bruno Taut
Nakano, January 8th 2018
labels: evento, Tokyo, mercado, Japón

Sailor Double Sided Nib

Double side nibs are not new to this blog. Not so long ago we saw a Vanco pen with a beautiful “duet” nib. On more recent years, several of the Sailor’s “specialty nibs” sported that same feature; that is, the nib points are cut and polished to provide a good writing experience both on the regular and on the inverted (upside down) positions.

Older than the Vanco Duet is the Sailor on display today. Everything on it points out at the 1930s as the production date. The pen is a flat top Japanese eyedropper inspired by the fashion set by the Parker Duofold, as was often the case in Japan at the time. It is made of ebonite and is coated with urushi lacquer.

There is an inscription on the pen body: "Sailor / Fountain Pens / PAT. O. 116315", together with the logo of the company.

The nib –the real protagonist of this story— is made of 14 K gold and is labeled as size 30. This number does not say much –or anything at all— about its actual size. If fact, it is very modest in dimensions: its total length is 23 mm, perfectly comparable to sizes 2 or 1 nibs by Pilot at the time.

The size 30 nib by Sailor.

The beak-shaped point of the lower end of the nib.

Its point is carefully cut. On the lower side –regular writing— the point takes the form of a bird beak with a very thin ending, thus drawing a very fine line. The upper side, on the contrary, is cut as a broad nib. The writing sample shows the final effects of these two points.

Writing sample of the double sided nib by Sailor. The square on the paper is 5x5 mm2.

These are the dimensions of the pen:

Length closed: 135 mm
Length open: 120 mm
Length posted: 168 mm
Diameter: 14.0 mm
Weight (dry): 18.5 g
Ink deposit: 2.4 ml

And these are the dimensions of the nib:

Length: 23.2 mm
Shoulder width: 5.8 mm
Weight: about 0.25 g
Material: 14 K gold

The engraving on the nib reads "14 CRT GOLD / Sailor / REGISTERED / PATENT OFFICE / -30-".

The manufacturing date: 11.4. Probably November of 1934.

The nib is dated on the lower side: 11.4. According to the regular way of dating Sailor pens and nibs, this means that the nib was probably manufactured in November of 1934.

The experimentation with fountain pens in Japan has indeed a long history.

Athena (1950s), lever filler – Pelikan 4001 Royal Blue

Bruno Taut
Nakano, January 5th 2018
labels: Sailor, plumín, Vanco, soluciones técnicas

Madrid 2017 (II)

The Madrid Pen Show of 2017 –its 14th edition—took place over a month ago, on November 17th to 19th. As I had announced, I attended it and these are some of my reflections and conclusions.

The event is, according to numerous sources, the leader of its class in Europe. 63 dealers, some of them with more than one table, offered their products to about 1500 visitors along the three days of the show. The typical expense can be traced between EUR 200 and EUR 300 per visitor, which makes a total business in the order of EUR 400,000. The average business per dealer is, therefore, around EUR 6000. Of course, these numbers are just approximate—save that of the number of dealers!

The Madrid Pen Show is also the major celebration of the very active Spanish pen community. The community provides most of the social aspect of the party, as the following video shows.

My thanks to Mr. José Riofrío, author of the video.

Some new people could be seen on the floor during those days. On one hand, some younger dealers offering both new and vintage pens as well as some paper products and other accessories. On the other, I could also see some foreign visitors, adding an additional layer to the international expansion of the event. This should not be a surprise—after all, American shows attract visitors across state lines...

On their side, locals seem to have understood the value of having such an event at their footsteps: knowledge, pens, better prices through competition… The contrast with the very parochial Japanese pen scene –a country where the pen industry is still strong and the community is very active— is startling.

Romillo Nervión – Sailor Blue Iron

Bruno Taut
Nakano, December 29th 2017
labels: evento, Madrid

The Obvious Connection

Years ago, fellow stylophile KostasK and myself described the pen brand Joker. After some research, we concluded that Joker was a Greek brand that marketed Japane-made Platinum pens.

The Platinum origin of those pens --just a couple of models-- was clear almost from the very begining by comparing some details: the obvious similarity with some Platinum models, the logo on the clip,...

Today I am showing another proof of the link between Platinum and Joker: the box of a Joker where both names coexist peacefully.

A Joker pen with a Joker box. Or is it a Platinum box? On the barrel, simply "JOKER".

The Platinum counterpart. On the barrel, "PLATINUM / TRADE (platinum logo) MARK / 10 YEARS PEN".

On top of that, boxes like this one were obiqutous in the Japanese industry in the 1950s. Many a brand used them, although displaying different designs.

A collection of boxes of Japanese pens from the 1940s and 1950s.

This box by Joker and Platinum contained a Joker pen fashioned after the Parker 51. This same model exists branded as Platinum, although with some significant differences. Tha main one lies on the nib--the Platinum nib is tipped whereas the Joker is merely folded. There are some other cosmetic variations: different engravings and a non-plated cap on the Joker pen.

The Joker nib is gold-plated and untipped. The engraving is not branded: "OSMIRIDIUM / 30".

The Platinum pen implements a "10 years" nib with the inscription "PLATINUM / 10 YEARS P-B / (JIS Logo)". It is tipped, and was likely to be gold-plated.

If only, the box of this Joker pen shows a clear connection between that brand and Platinum. But this is a connection Platinum said to know nothing about.

Sailor Ballerie - Sailor Red-brown

Bruno Taut
Nakano, November 11 2017
etiquetas: Joker, Platinum

Yatate

Originally, a “yatate” (矢立) is a stand for the arrows in the old tradition of Japanese archery, “kyudô” (弓道). But the word is better known as a container to carry a brush and a small deposit of water. It was used by merchants and educated people who had the need to write on the go.

"Benri-gata" type of "yatate". This is the type whose style was copied for the "yatate" pen. On this example, the brush container has some holes.

This type of "yatate", "ittai-gata", is better known.

With the apparition of the fountain pen, those traditional “yatate” became obsolete. However, the name was rescued to describe a particular type of fountain pen. On them, the cap is almost as long as the pen itself—nib, section, and barrel. When closed, the pen might look just like a rod of ebonite, but upon opening it, a full size pen show up.

A typical "yatate" pen made of ebonite. At first, it just looks like an ebonite rod. Picture courtesy of Mr. Ariel Zúñiga.

Only open it is possible to see that there was a pen inside. Picture courtesy of Mr. Ariel Zúñiga.

“Yatate” pens saw their glory days by the beginning of the twentieth century. By 1920 they were gone almost completely, and only the occasional retro-looking pen in this geometry kept them alive.

Taccia is one of the brands stationer Itoya uses for its own pens, others being Romeo, Mighty, Natsuki, Itoya. Taccia pens, interestingly enough, are available overseas. In Japan, though, its distribution seems limited to Itoya shops. Some of its models, mostly high end, implement Sailor nibs, whereas the least expensive ones use JoWo nibs made of steel.

Obviously, a Taccia pen.

The following model is called Taccia Covenant, and it is, in actual terms, a “yatate” pen made of plastic. The Covenant uses international cartridges and converters, and sports a very correct JoWo steel nib. The available nib points are F, M, and B. The feed, needless to say, is made of plastic.

The "Midnight Breeze" Taccia Covenant. Well, a "yatate" pen.

This model comes in three possible colors: marbled brown (“Parchment Swirl”) with silver clip and rings; marbled blue (“Midnight Breeze”) with silver ornaments; and black (“Jet Black”) with golden accents.

The long cap screws on the pen both when closed and when posted. Posted, the pen is quite thick and could become a bit uncomfortable to some users. Unposted, the pen is very comfortable.

When posted, it becomes a hefty pen.

These are its dimensions:

Length closed: 145 mm.
Length open: 139 mm.
Length posted: 182 mm.
Diameter of the body: 12.5 mm.
Diameter of the cap: 15.5 mm.
Weight (inked): 34 g (uncapped, 19.0 g)

The steel nib made by JoWo.

The current price in Japan is JPY 14000, plus taxes, and it does not fare well against the workhorses of the main three Japanese manufacturers of fountain pens—Pilot´s Custom 74 and Custom 91, Platinum´s 3776 Century, and Sailor´s Slim Pro Gear, Profit and Promenade. All of them implement 14 K gold nibs and cost between JPY 10000 and JPY 12000 (save for the Platinum Century 3776 with music nib).

But they are not “yatate” pens…


My thanks to Mr. Ariel Zúñiga.

Eboya Hakobune XL – Sailor Black

Bruno Taut
Nakano, November 5th, 2017
etiquetas: Itoya, mercado, Japón, JoWo, Taccia