13 September 2019

Japanese Eyedropper Today (I)

The so-called Japanese eyedropper system –inki-dome shiki (インキ止め式) in Japanese— was in fact invented by Onoto in the beginning of the 20th century. Those Onoto reached Japan imported by Maruzen and the system –an eyedropper with a shut-off valve— clicked among the locals. The final result was that this system was copied and reproduced by most Japanese pen makers along its history up to today.


An Onoto with the shut-off valve system. Not yet a Japanese eyedropper, I guess.


A Japanese Swan (Nobuo Ito's Swan) with the Japanese eyedropper system.

The inki-dome, however, fell out of favor by the late 1950s when Platinum introduced the ink cartridge and most other makers followed the example. Only minor makers –I am thinking of Sakai Eisuke's operations— kept the system alive till the 1980s.


A Sakai Eisuke's pen made in collaboration with Kabutogi Ginjiro (::1::). Possibly from the 1960s.

In 1985, Pilot commissioned lathe master Sakai the creation of a prototype based on the style of the Pilot pens from the early 1930s, The result was what later became the Pilot (and Namiki) size 50 Urushi, and it implements the Japanese eyedropper system.


The Pilot Urushi in size 50--a modern Japanese eyedropper. This pen is incorrectly named by many as Namiki Emperor, but the Emperor model is decorated with maki-e techniques according to the Namiki catalog.

But who else followed? Not much.

Eboya used the system for some years (::2::, ::3::), but its production relied in the know-how of lathe master Kanesaki Noritoshi. Eboya's boss, Mr. Endo, has announced the new production of Eboya pens with this system, but there are no final dates for their release.


An old Eboya (2013) from the Kanesaki time. It implements the Japanese eyedropper system. At that time, the brand name was still Nebotek.

More recently, as of 2018, the sort-lived Iwase Seisakusho also marketed some pens with the Japanese eyedropper system. These were either old incomplete pen bodies by Ishi Shoten (owner of the brand Yotsubishi) or new pen bodies made by lathe master Momose. But Iwase Seisakusho had a very brief life and very few units of it made to the market.


An Iwase Seisakusho based on a body by Momose Yasuaki.

From California, Danitrio makes some models with Japanese eyedropper. These are usually expensive models with urushi or maki-e decoration.


Some Danitrio pens as exposed at Itoya Ginza (Tokyo) in 2010. Photo courtesy of Moskva.

Finally, a surprising actor is the Taiwanese brand Opus 88 (Jin Gi Industrial Co.). But these Japanese eyedroppers deserve a Chronicle on their own.


The Opus 88 Koloro. A surprising new actor in the Japanese eyedropper business.



Opus 88 Koloro – De Atramentis Beethoven

Bruno Taut
Nakano, September 12th 2019
etiquetas: soluciones técnicas, Pilot, Eboya, Danitrio, Iwase Seisakusho, Opus 88, mercado, Onoto, Japón, mercado, Kanesaki, Sakai Eisuke, Momose Yasuaki

4 comments:

Anthony said...

Thank you for the thorough list! The Japanese Eyedropper is such a wonderful simple system, I wish there were more about...

Bruno Taut said...

So do I, Anthony!

Thanks for passing by and commenting.

BT

Eric Wilson said...

Hi Anthony,
The Japanese Eyedropper is such a wonderful simple system. Unfortunately it is not a simple pen to service when the back end seal fails. I recently serviced a Danitrio and was disappointed that the barrel end seal had failed after only 20 years. Beautiful pen in finish and use though, once serviced.
Eric

Bruno Taut said...

Thanks, Eric, for your comment.

Parker Vacumatics fail every other year or so, and you need to replace the diaphragm. In comparison, your Danitrio is almost invulnerable.

Cheers,

BT

Post a Comment

Your comments are welcome and appreciated.